GEK Wiki / Default v3-x Configuration Dimensions
  • If you are citizen of an European Union member nation, you may not use this service unless you are at least 16 years old.


Default v3-x Configuration Dimensions

Page history last edited by jim mason 11 years, 11 months ago


Critical Specs: 

- Nozzle center holes 2.5" above reduction restriction

- Nozzle caps drilled with 1/4" holes

- Reduction cone: 3" top diameter, 6" base diameter, 6" height.

- Tar fence of 6.5" diameter around cone and up to bottom of nozzles.




Comments (0)

You don't have permission to comment on this page.