GEK v3 CAD drawings for all sheet metal parts

This version was saved 16 years ago View current version Page history

Saved by jim mason
on October 27, 2009 at 10:42:29 pm

return to How to Build and Run the GEK Gasifier

Here are the CAD drawings for all cut sheet metal pieces used to make the GEK v3.0. The drawings are divided between the rectangular pieces that are rolled to make the vessel tubes, and the circular pieces for flange rings, end plates and grates.

All GEK materials are open source and actively supported by ALL Power Labs. The design concepts and drawings below are released under the intentions of the Creative Commons Attribution-Noncommercial-Share Alike License. Many rights are given. Some rights are reserved. You are welcome to use this material free of charge for making or using the GEK in any non-commerical endeavor. By agreeing to use the material, you agree to acknowledge its source and similarly post documentation for updates and/or new additions you come up with for the GEK so others can benefit from your work. Updates should be posted to the GEKforum at http://gekgasifier.com/forums/

Using these materials for commerical manufacturing and/or sale requires a formal licensing agreement with ALL Power Labs. The licensing fee is a simple 10% on gross sales. If you are going in this direction, please contact Jim Mason at "gek_(at)_allpowerlabs_(dot)_org for more details. Making and using the GEK for a personal commercial installation is fine and without licensing requirements. Licensing only comes into play if you want to maufacture, sell and/or install the units for others, and receive pay in the process (i.e. you want to go into business making and selling the GEK).

And now, the CAD files . . .