GEK Licensing
Fabrication, Assembly, and Operating Manuals
GEK Gasifier & PowerPallet
Below you will find all instructions for fabricating, assembling and running the GEK gasifier and Power Pallet. The instructions support a variety of paths-- from complete DIY wood gas plans for scrap tank hacks, to assembling and firing the various complete gasifier kits offered by ALL Power Labs. CAD drawings, plumbing inventories, hearth dimensions, and associated support materials are provided in detail to enable your gasifier building and operation. All resources are divided by version, so make sure you are working with the most recent one.
These materials are offered under the Creative Commons Attribution-Noncommercial-Share Alike license. You are welcome to use these materials free of charge for any personal use- whether non-profit or for profit. If you do so, we request you acknowledge the source and similarly post documentation of updates and/or new additions you come up with to the GEK Forum and/or GEK Wiki. The only use limitation concerns commercial manufacturing and resale. If you are going in this direction, see the GEK license for more info.
Current Manuals
 |
GEK PowerPallet
Version 6 to current (rev 9)
|
 |
Process Control Unit (PCU)
Version 2.00-3.02
|
|
GEK Gasifier
Version 3.0-4.x
|
Current Assembly and Fabrication Instructions
 |
GEK Level IV Kits (fabrication complete, ready for final assembly)
Version 4.x
|
|
GEK Level III Kits (you weld and assemble)
Version 4.x
|
 |
GEK Level I, CAD Files
Version 4.0
|
Components, Assemblies, Accessories, Add-Ons, Projects, and References
Scaling up the GEK
|
Archive of Documentation for Older Versions
GEK Gasifier
- GEK v3.x
- GEK v3.5
- GEK v3.0
- GEK v2.x
- For instructions and manuals to older versions, please contact support@allpowerlabs.org
|
GEK PowerPallet
- 10kW, B1-B3
- 10/20kW, B4
- 10/20kW, rev5
- 10/2kW0, rev6
|
| |
Components, Assemblies, Accessories, Add-Ons, Projects, and References
|
return to GEK wiki front page
Comments (3)
Graham Andoe said
at 8:20 am on Aug 9, 2009
Great techie info with honest performance expectations., thanx and well done, Gents, Graham
jeremy rutman said
at 12:10 pm on Jul 17, 2010
hi, can you put up the 4.0 version files? thanks
jeremy rutman said
at 3:55 am on Jul 18, 2010
Hi, can you post the hourglass bell dimensions (final and uncurved). There seem to be bellbottoms here
http://gekgasifier.pbworks.com/Stainless-sheet-steel-reduction-bells?SearchFor=reduction+bell&sp=8
and an hourglass here
http://gekgasifier.pbworks.com/f/Luc+hourglass+reduction+bell+design.dxf
is the latter whats currently used (ie in v3.5)
You don't have permission to comment on this page.