|
Ejector-Venturi gas drive with air premix swirl burner
This version was saved 14 years, 3 months ago
View current version Page history
Saved by jim mason
on December 29, 2009 at 3:55:56 pm
Inventory for building the GEK ejector venturi
|
|
PART TYPE
|
#
|
|
|
1.5" black cross |
1 |
1.5" black plug |
1 |
1.5" black close nipple |
4 |
1.5" x 1.5" x 1/2" black reducing tee |
1 |
1.5" to 3/4" black reducing bell |
2 |
0.75" x 8" black nipple |
1 |
1.5" gate valve |
1 |
0.75" ball or gate valve for air mix |
1 |
1/4" ball or needle valve for air drive |
1 |
1.5" to 3/4" black reducing bushing |
1 |
0.75" black nipple, close |
1 |
0.5" black nipple, 2 long, INSIDE THREADED |
1 |
0.5" black tee |
1 |
0.5" black plug |
1 |
0.5" to 1/4" reducing bushing |
1 |
1/4" air quick connect (m or f ? ) |
1 |
3/8" black nipple, 4" /4.5" INSIDE THREADED |
1 |
brass bard 1/4 npt x 1/8 barb |
2 |
1.5" black nipple, 6" long |
1 |
1/4" black nipple, close |
1 |
1/4" npt x 1/8" brass barb |
1 |
Ejector-Venturi gas drive with air premix swirl burner
|
Tip: To turn text into a link, highlight the text, then click on a page or file from the list above.
|
|
|
Comments (0)
You don't have permission to comment on this page.